Hacker Public Radio
http://hackerpublicradio.org/about.php
A daily show hosted the community on topics that are of interest to hackers and hobbyists.Hacker Public Radio is an podcast that releases shows every weekday Monday through Friday. Our shows are produced by the community (you) and can be on any topic that are of interest to hackers and hobbyists.en-usyesHacker Public RadioCommunity Radio, Tech Interviews, Linux, Open, Hobby, Software FreedomCreative Commons Attribution-ShareAlike 3.0 Licensefeedback@NOSPAM-hackerpublicradio.org (HPR Feedback)HPR Volunteeradmin@hackerpublicradio.orgadmin@hackerpublicradio.org (HPR Volunteer)katehttp://www.rssboard.org/rss-specification43200SaturdaySundayhttp://hackerpublicradio.org/images/hpr_feed_small.pngHacker Public Radio
http://hackerpublicradio.org/about.php
The Hacker Public Radio Old Microphone Logo164144HPR VolunteerHacker Public Radio is an podcast that releases shows every weekday Monday through Friday. Our shows are produced by the community (you) and can be on any topic that are of interest to hackers and hobbyists.admin@hackerpublicradio.orgTue, 30 Nov 2021 00:00:00 +0000noNoHPR1502: Practical Math - Units - Distances and Area, Part 2catintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)
http://hackerpublicradio.org/eps.php?id=1502
HPR Episode: Using and Converting Between Units of Distance
Intro: Last time, we talked in general terms about units, numbers and
how they might be useful in practice. In this episode, we address some
specific measurement units that apply to distance and area, and how we
might convert from one system to another to better understand both.
Entire point of this episode is this: Carry units in calculations on
distances and areas, and you'll have more success in using them in
your life.
Segment 1: Review of Distance and Area conversions in the English system
1. Links from last time
Table of Units:
http://www.csgnetwork.com/converttable.html
To see why the story is tremendously more complicated than my account
http://en.wikipedia.com/wiki/Mile
Fun article on the mile.
http://www.sizes.com/units/mile.htm
High school student theme on the furlong.
http://www.writework.com/essay/history-furlong by silverAlex2000
Brief dictionary article on the mile, referenced by Dr. Math
http://www.unc.edu/~rowlett/units/dictM.html#mile
Referred by http://mathforum.org/library/drmath/view/61126.html
Resource: StackExchange Physics and Maths sections ("mile" question)
http://physics.stackexchange.com/questions/57785/difference-between-nautical-and-terrestrial-miles
2. Converting between units
a. Units of distance usually defined as multiples of each other
- 1 mile = 5,280 feet - 1 hand = 4 inches
- 1 foot = 12 inches - 1 yard = 36 inches
Skipping ahead to look at the metric system, we now have:
- 1 inch = 2.54 centimeters (exact). Regularized in recent years.
b. This works because there's consensus on Zero distance, so we don't
have to adjust for differing origins, as we do with the
non-absolute temperature scales like Fahrenheit and Celsius.
- We'll get to temperature, non-absolute scales in a later show.
c. For absolute scales, we can convert from one unit to another using
a "conversion factor". That is, we can convert a measurement
expressed in one unit to its equivalent in another unit by
multiplying or dividing by some number to stretch or compress
the original unit to match the target unit.
- Example: I know that 1 foot is 12 inches, so how many inches are
there in 10 feet? How feet are there in 660 inches?
- It is clear that a factor of 12 ought to be involved, but how do
I know when to multiply or divide by 12 in the conversion?
- Wait! I'm serious. When you see this problem for the first
time, you have to think this through to get it right.
* Without a system in place, you always have to think about it.
- Answers in naive setup:
(i) 10 feet = (12 * 10) inches = 120 inches
(ii) 660 inches = (660 / 12) feet = 55 feet
3. Having a system. Or units conversion as "multiplying by One"
a. In each of the solutions I wrote down above, I start with an
equation that looks like this: X inches = Y feet.
b. Inches are not feet, and this way of writing down the calculation
does NOT help you figure you how the conversions should work, or
whether you should multiply or divide to get the right answers.
c. Here's a system for creating conversion factors that tell you what
to do at each step in the units conversion process. It is based
on the very obvious fact that when I multiply any number by '1',
its value remains unchanged.
- Start with one of the identities we wrote down at the beginning.
In this case, let's use: 12 inches = 1 foot
- If I divide equals by equals, the results are equal.
So I can write:
12 inches 1 foot
12 inches = 1 foot implies that --------- = --------- = 1
1 foot 12 inches
- Get the first term by dividing my original identity by (1 foot).
- Get the second term by dividing my original identity by (12 in).
d. To make a conversion from feet to inches, I use:
12 in 10 ft
10 ft * 1 = 10 ft * ------- = ------ * 12 in = 10 * 12 in = 120 in
1 ft 1 ft
- Note: In the fraction (10 ft) / (1 ft), the units "cancel out",
which leaves a unitless number.
- Suppose we start with the other form for the conversion factor:
1 ft 10 square feet
10 feet * 1 = 10 feet * ------ = -------------- = ???
12 in 12 inches
- See? When I use the form where the units don't cancel each
other, I get a resulting equation that is still correct. It
just doesn't make much sense to me as a reader.
- This is what you get when you "divide by 12" to convert feet to
inches, but the difference is that you KNOW something's wrong.
- You do not have to even look at the numbers to know that this
could not possibly be the right number of inches in 10 feet.
Brilliant Insight #2: When you use unit conversion factors, you help
your cause by carrying along both sets of units in the form of a
fraction as you go through your calculation.
- If the units on the right-hand side of your final equation don't
match the units you want (after everything else cancels out), your
numerical answer is almost certainly WRONG.
- The implication here? To convert units of distance, you need to
multiply or divide by a
conversion factor = (X New_Units) / (Y Old_Units).
When you do this, write the conversion factor in its full fractional
form, and carry out all of the multiplications and cancellations.
- If you do the conversion this way, and the units match, you only
have to check your arithmetic to be sure you've got it right.
- If the units you want do not match those on the right side of the
equal sign, you are solving the wrong problem. The equation may
be correct, but it is not expressed in the units you wanted.
6. Let's use the system to solve the second example:
1 ft 660 in * 1 ft
660 in * 1 = 660 in * ------- = --------------- = 55 feet
12 in 12 in
Why? The "inches" units cancel out because they appear in both
numerator and denominator (top/bottom, upstairs/downstairs) of
the fraction in the next to last term, leaving only "feet".
Why people hate units and conversion problems:
http://www.regentsprep.org/regents/math/algebra/am2/leseng.htm
Comment: The "algebraic" approach suggested here is ugly, ad hoc in
nature, and unnecessarily complicated. Forget about setting up
equations and going through formal operations to solve them.
Choose your conversion factors so that the units work out properly
as a straight multiplication problem with cancellation of all the
units you don't want. You may have to "divide" numbers, but you
can use your calculator for working through the numbers.
Cranky Summary: You should not have to solve equations to convert
between units. Phooey on anyone who says otherwise. :-)
Segment 2: Conversions using compound conversion factors.
1. Suppose I want to find the number of inches in a furlong, or the
number of acres (or hectares) in a square mile?
- My almanac doesn't carry these conversion factors, so I start with
what I do have and work my way through it.
4 rods 16.5 ft 12 in
1 furlong = 10 chains = 10 chains * ------- * ------- * -------
1 chain 1 rod 1 ft
= 10 * 4 * 16.5 * 12 inches = ... = 7920 inches
2. For acres in a square mile (1 mi^2), we have a bit more to do.
Abbreviations used: miles = mi, furlong = fur, chain = ch
Area means that we are dealing in two dimensions, so we have to
convert the lengths in each dimension. An acre is already a
measure of area, so we're good.
1 acre 10 ch 8 fur 10 ch 8 fur
1 sq mi = 1 mi^2 * -------- * ------ * ----- * ----- * -----
10 ch^2 1 fur 1 mi 1 fur 1 mi
= (1 mi * 1 mi) * 1 acre * 10 ch * 10 ch 8 fur * 8 fur
------------- * -------------
10 ch * ch 1 mi * 1 mi
Units cancel, leaving this:
1 sq mi = 1 acre * (100/10) * (8 * 8) = 10 * 64 acres = 640 acres
Segment 3: Hey! Ready to try metric?
1. Metric system never caught on in the US, although most of English-
speaking world has adopted it. Units conversion is easy in the
metric system, because everything is in powers of 10.
- But you still need to carry along units in calculations!
2. Area and distance units in the metric system
- Basics of distance: Centimeter is easy for us to see, and now the
factor to convert centimeters to inches is exact.
1 inch = 2.54 centimeters (cm) exactly
1 inch
1 meter = 100 cm = 100 cm * --------- = 39.37 in (approximate)
2.54 cm
1 kilometer = 1,000 meters
- Basics of area:
1 are = 100 sq meters (area of a square that's 10m on each side)
100 sq m
1 hectare = 100 ares = 100 ares * ---------- = 10,000 sq meters
1 are
3. For short distances, we should do our conversions fairly precisely.
- There's usually a higher relative error from rounding off too soon.
- If you measure wood for a small project, you want to be "close".
2.54 cm
So 1 foot = 12 in * --------- = 30.48 cm exactly. Cut carefully!
1 in
4. For larger distances, like distances covered in track and field, or
the length of a football pitch (to a spectator), approximations can
give you a nice intuition for comparing units you know and a new
set of units that you don't know as well.
- 1 meter is around 39.37 inches. Suppose I call it about 1.10 yards
as a kind of approximate benchmark (39.60 in), so each meter in
my reckoning is about a quarter of an inch too long?
- If I'm planning a space mission, I could be in trouble.
But how bad would this be for getting an intuitive feel of the
distances covered by the athletes in the Olympic Games?
- Error at 100 meters is about 0.23 in (0.6 cm) * 100 = 60 cm over
at 200 meters, it's 1.1 m over.
at 1 kilometer, it's 5.6 m over.
Unless you're a long-range sharpshooter, 5.6m off in 1 km seems OK.
5. Bonus: The news talked about a wildfire that burned 100,000 hectares.
What kind of area are we talking about?
- Let's use our approxmation of 1 meter is about 1.1 yards.
- Acres are defined in terms of "square chains", so let's look at
meters vs chains to see what we get.
1 m
1 chain = 4 linear rods = 22 yds = 22 yds * -------- = about 20m
1.1 yd
20m 20m
1 acre = 10 square chains = 10 ch * 1 ch * ----- * ------
1 ch 1 ch
= 10 * 1 * 20m * 20m = 4,000 square meters, or 0.4 hectares
- Wow! An acre's about 0.4 hectares, or 1 hectare's about 2.5 acres.
So what's the answer?
2.5 acres
a) 100,000 hectares = 100,000 hectares * --------- = 250,000 acres
1 hectare
1 sq. mi 250,000
b) 100,000 hectares = 250,000 acres * --------- = ------- sq. mi
640 acres 640
= 391 sq. miles (about 400 sq miles)
Note: This suggests a shortcut conversion (hectares to square miles).
640 acres 1 hectare
1 square mile = 1 sq. mile * --------- * --------- = 256 hectares
1 sq. mi. 2.5 acres
6. Final check: Error analysis on this approximate conversion from
hectares to acres or square miles.
- Using Google or 'units' in the shell, we have:
1 sq mi = 259 hectares to 6 significant digits, versus 256 (1%)
Note: If we used 250 hectares per square mile, the relative error
is 3.5%. That's less than the error in the news report.
1 hectare = 2.47105 acres, versus 2.5 (1% error)
Units shell command: Dann Washko did a really nice job on 'units' for HPR.
* Linux in the Shell #26: http://www.linuxintheshell.org/
* HPR Episode #1213: http://hackerpublicradio.org/eps.php?id=1213
Final word: Unless you are buying, selling or cultivating land, use the
cruder approximations here to understand the relationships between
acres, hectares and square miles. It will make you seem smarter.
- If someone calls you out and says it's wrong, blame "that guy on HPR."
Next Topic? Volumes and recipes, other than medicines (separate topic)
- Volumes are the bottom line in cooking, unless they aren't.
- Hint: You should weigh some items, like some kinds of flour.
]]>
Tue, 06 May 2014 00:00:00 +0000http://hackerpublicradio.org/eps/hpr1502.mp3noNoHPR1497: Practical Math - Units - Distances and Area, Part 1catintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)
http://hackerpublicradio.org/eps.php?id=1497
HPR Episode: Using and Converting Between Units of Distance
Intro: Last time, we talked in general terms about units, numbers and
how they might be useful in practice. In this episode, we address some
specific measurement units that apply to distance and area, and how we
might convert from one system to another to better understand both.
Entire point of this episode is this: Carry units in calculations on
distances and areas, and you'll have more success in using them in
your life.
Segment 1: Distance and Area in the English system
1. Series will focus on English and Metric systems.
a. Basic units of distance: inch, foot, yard, mile
b. Basic units of area: square inch, square foot, acre, square mile
2. Other units of distance and area do exist
a. Barleycorn for shoe sizes (1/3")
b. Hand for describing horses (4")
c. Rod for surveying (16-1/2 feet)
d. Chain, also for surveying (4 linear rods, 66 feet, 22 yards)
e. Furlong from horse racing and agriculture (220 yards, 10 chains)
f. League (about an hour's walk) usually assumed to be 3 miles
- Nautical: technical unit that's exactly 3 knots
g. Square yard may be used in quotes for carpet installations
Table of Units: http://www.csgnetwork.com/converttable.html
Brilliant Insight #1: Units of distance were originally arbitrary. We
did not standardize on inches, feet, miles, and so on because these
are magical units with special merits. They were convenient at the
time and place where they were invented.
Standards let us talk to each other about distance without having to
be in the same place at the same time. We'd have trouble if builders
builders had to ask for boards "as long as my arm", or a plank
that's "Yea long".
3. Bizarre properties of some English units explained:
a. Rod/Chain: Used in measuring farmland and building plots
- Rod is 5-1/2 yards, or 16-1/2 feet.
- Chain is 4 linear rods, or the length of a surveyor's chain
- Could have been longer or shorter. Standard emerged from usage.
b. Furlong: Longest row you can plow without resting the animals
- Defined as 10 chains (220 yards)
c. Acre: If you are on a quiz show, it's 43,560 square feet. Huh?
- Defined as the area of a plot that's 1 chain wide by a furlong
- Putting definitions together, we peek ahead to make sense of it.
1 acre = 1 chain x 1 furlong x 10 chains <--- multiply by 1
---------- (1 furlong is
1 furlong 10 chains)
Cancelling out furlongs upstairs and downstairs, we get
1 acre = 1 chain x 10 chains = 10 "square chains"
- So the square feet in an acre is not (completely) arbitrary
- It's just mostly arbitrary, but consistent with shorter units.
d. Mile: Why is it 5,280 feet? Similar story [Simplified version!]
- Roman occupation brought in a 5,000 foot mile ("mille passus")
Warning! The Roman mile was defined in Roman feet, so it was
a bit shorter than I've painted it.
- Originated as 1,000 double-steps or "paces"
- Since 1,000 was "mille", unit naturally became "mile" in English
- Elizabeth I (1603, or was it 1593?):
* Statute mile set to 8 furlongs (1,760 yds; 5,280 ft)
* Why 8 furlongs? Why not 10 furlongs?
* Goal: Set new mile close to existing mile, but as N furlongs.
* New "statute mile" only about 5% longer than Roman mile
Note: Similar analysis could be used with other "miles".
* Setting a mile to a even multiple of a furlong had practical
benefits, and keeping it close to the old unit reduced
conversion costs for "legacy users".
- That's why we've inherited a mile that measures 5,280 feet.
To see why the story is tremendously more complicated than my account
http://en.wikipedia.com/wiki/Mile
Fun article on the mile.
http://www.sizes.com/units/mile.htm
High school student theme on the furlong.
http://www.writework.com/essay/history-furlong by silverAlex2000
Brief dictionary article on the mile, referenced by Dr. Math
http://www.unc.edu/~rowlett/units/dictM.html#mile
Referred by http://mathforum.org/library/drmath/view/61126.html
Resource: StackExchange Physics and Maths sections ("mile" question)
http://physics.stackexchange.com/questions/57785/difference-between-nautical-and-terrestrial-miles
4. Converting between units
a. Units of distance usually defined as multiples of each other
- 1 mile = 5,280 feet - 1 hand = 4 inches
- 1 foot = 12 inches - 1 yard = 36 inches
Skipping ahead to look at the metric system, we now have:
- 1 inch = 2.54 centimeters (exact). Regularized in recent years.
b. This works because there's consensus on Zero distance, so we don't
have to adjust for differing origins, as we do with the
non-absolute temperature scales like Fahrenheit and Celsius.
- We'll get to temperature, non-absolute scales in a later show.
c. For absolute scales, we can convert from one unit to another using
a "conversion factor". That is, we can convert a measurement
expressed in one unit to its equivalent in another unit by
multiplying or dividing by some number to stretch or compress
the original unit to match the target unit.
- Example: I know that 1 foot is 12 inches, so how many inches are
there in 10 feet? How feet are there in 660 inches?
- It is clear that a factor of 12 ought to be involved, but how do
I know when to multiply or divide by 12 in the conversion?
- Wait! I'm serious. When you see this problem for the first
time, you have to think this through to get it right.
* Without a system in place, you always have to think about it.
- Answers in naive setup:
(i) 10 feet = (12 * 10) inches = 120 inches
(ii) 660 inches = (660 / 12) feet = 55 feet
5. Having a system. Or units conversion as "multiplying by One"
a. In each of the solutions I wrote down above, I start with an
equation that looks like this: X inches = Y feet.
b. Inches are not feet, and this way of writing down the calculation
does NOT help you figure you how the conversions should work, or
whether you should multiply or divide to get the right answers.
c. Here's a system for creating conversion factors that tell you what
to do at each step in the units conversion process. It is based
on the very obvious fact that when I multiply any number by '1',
its value remains unchanged.
- Start with one of the identities we wrote down at the beginning.
In this case, let's use: 12 inches = 1 foot
- If I divide equals by equals, the results are equal.
So I can write:
12 inches 1 foot
12 inches = 1 foot implies that --------- = --------- = 1
1 foot 12 inches
- Get the first term by dividing my original identity by (1 foot).
- Get the second term by dividing my original identity by (12 in).
d. To make a conversion from feet to inches, I use:
12 in 10 ft
10 ft * 1 = 10 ft * ------- = ------ * 12 in = 10 * 12 in = 120 in
1 ft 1 ft
- Note: In the fraction (10 ft) / (1 ft), the units "cancel out",
which leaves a unitless number.
- Suppose we start with the other form for the conversion factor:
1 ft 10 square feet
10 feet * 1 = 10 feet * ------ = -------------- = ???
12 in 12 inches
- See? When I use the form where the units don't cancel each
other, I get a resulting equation that is still correct. It
just doesn't make much sense to me as a reader.
- This is what you get when you "divide by 12" to convert feet to
inches, but the difference is that you KNOW something's wrong.
- You do not have to even look at the numbers to know that this
could not possibly be the right number of inches in 10 feet.
Brilliant Insight #2: When you use unit conversion factors, you help
your cause by carrying along both sets of units in the form of a
fraction as you go through your calculation.
- If the units on the right-hand side of your final equation don't
match the units you want (after everything else cancels out), your
numerical answer is almost certainly WRONG.
- The implication here? To convert units of distance, you need to
multiply or divide by a
conversion factor = (X New_Units) / (Y Old_Units).
When you do this, write the conversion factor in its full fractional
form, and carry out all of the multiplications and cancellations.
- If you do the conversion this way, and the units match, you only
have to check your arithmetic to be sure you've got it right.
- If the units you want do not match those on the right side of the
equal sign, you are solving the wrong problem. The equation may
be correct, but it is not expressed in the units you wanted.
6. Let's use the system to solve the second example:
1 ft 660 in * 1 ft
660 in * 1 = 660 in * ------- = --------------- = 55 feet
12 in 12 in
Why? The "inches" units cancel out because they appear in both
numerator and denominator (top/bottom, upstairs/downstairs) of
the fraction in the next to last term, leaving only "feet".
Why people hate units and conversion problems:
http://www.regentsprep.org/regents/math/algebra/am2/leseng.htm
Comment: The "algebraic" approach suggested here is ugly, ad hoc in
nature, and unnecessarily complicated. Forget about setting up
equations and going through formal operations to solve them.
Choose your conversion factors so that the units work out properly
as a straight multiplication problem with cancellation of all the
units you don't want. You may have to "divide" numbers, but you
can use your calculator for working through the numbers.
Cranky Summary: You should not have to solve equations to convert
between units. Phooey on anyone who says otherwise. :-)
Segment 2: Conversions using compound conversion factors.
1. Suppose I want to find the number of inches in a furlong, or the
number of acres (or hectares) in a square mile?
- My almanac doesn't carry these conversion factors, so I start with
what I do have and work my way through it.
4 rods 16.5 ft 12 in
1 furlong = 10 chains = 10 chains * ------- * ------- * -------
1 chain 1 rod 1 ft
= 10 * 4 * 16.5 * 12 inches = ... = 7920 inches
2. For acres in a square mile (1 mi^2), we have a bit more to do.
Abbreviations used: miles = mi, furlong = fur, chain = ch
Area means that we are dealing in two dimensions, so we have to
convert the lengths in each dimension. An acre is already a
measure of area, so we're good.
1 acre 10 ch 8 fur 10 ch 8 fur
1 sq mi = 1 mi^2 * -------- * ------ * ----- * ----- * -----
10 ch^2 1 fur 1 mi 1 fur 1 mi
= (1 mi * 1 mi) * 1 acre * 10 ch * 10 ch 8 fur * 8 fur
------------- * -------------
10 ch * ch 1 mi * 1 mi
Units cancel, leaving this:
1 sq mi = 1 acre * (100/10) * (8 * 8) = 10 * 64 acres = 640 acres
Next time: "Hey! Ready to try metric?"
]]>
Tue, 29 Apr 2014 00:00:00 +0000http://hackerpublicradio.org/eps/hpr1497.mp3noNoHPR1353: Practical Math - Introduction to Unitscatintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)catintp.nospam@nospam.yahoo.com (Charles in NJ)
http://hackerpublicradio.org/eps.php?id=1353
Introduction: Units are the bridge from learning abstract arithmetic
operations on numbers to actually using maths to navigate the world of
objects, distance, time, rates, volume, temperature, heat, current,
voltage, and even cooking using recipes.
Goal for the series: Embracing units, and carrying them along as you go,
can help you work with confidence in using maths in your life.
When you start to use maths to solve real problems, you are going to
run into units. This series is intended to show you that units are
your friends, and that they're here to help you.
Goal for this episode: We want to look at what units are, what they do,
types of units, and how to mix unitless numbers with units.
Resource for the series:
* Khan Academy pages on Rates, Ratios and Units
https://www.khanacademy.org/math/arithmetic/rates-and-ratios
Most articles that would be relevant to this introductory episode were
about teaching physics and chemistry, or discussions of philosophical
implications of doing what we will be doing at every turn in this
series.
All of the formal operations that we will learn to do with units are
done every day in real life by experts in their respective fields. I am
not worried about what it means to say, "There are 12 inches in a foot."
Later shows will have more links and resources.
Segment 1: What do we mean by units?
1. Definition: Two types of units are useful in practical maths:
a. Counting units: An individual thing treated as single or complete.
Units can also apply to an individual component of a larger or
more complex system. E.g., mufflers can become part of a car.
- Think of objects that you would keep in an inventory in your
pantry or in a warehouse.
b. Measurement units: A quantity chosen as a standard that you can
use as a common benchmark for comparing other quantities (of the
same kind).
- "Same kind": Don't try to compare distances to times or volumes.
- "Standards": Communication tool for talking about quantities
without being face-to-face. If you have standard units,
you avoid expressions like "yea long", "kind of tall", etc.
- Probably invented by buyers and sellers, or by the spouse of an
avid fisherman.
c. Composite units: Units can be multiplied together (or divided) to
create new types of units. Some people call these "derived
quantities", but that may sound too much like programming talk.
I use composite units because of the mental picture it creates of
putting things together, or doing one operation after another.
- Dimensionality changes:
* 1 ft * 1 ft = 1 square foot: distance^2 --> area
* 1 ft * 1 ft * 1 ft = 1 cubic foot: distance^3 --> volume
- Rates:
* Speed: distance / time = average speed, as in kilometers/hour
* Flow rates: volume / time, as in liters/minute
* Pressure: force / area, as in pounds / square foot
* Density: mass / volume, as in kilograms / liter
* Rationing: (1 period) counting units / time, as in apples/day
(longer time) apples / family_member / day
- We will run more of these types of units in later shows.
2. Other kinds of numbers: Not every quantity has units attached
a. Numbers can be unitless. Unitless numbers help you make sense of
quantities with units through comparisons, extrapolations, etc.
- Example: Percent changes are unitless floating point numbers,
unless it is tied to an elapsed time. That's a "rate", which
has units of "% per year" (say).
- Example: Percentage of Total values are unitless fractions, too.
- Example: Any unit can be multiplied by a unitless integer.
* 2 feet, 3 apples, 4 quarts, 10 meters, etc.
* "Twice as many", "ten times as far", "double a recipe"
- Counting units can be multiplied by a unitless fraction, but the
result will be rounded off to the nearest integer value.
* "Mary has 2-1/2 times as many apples as John," is fine if
John has 4 apples, and Mary has 10 apples.
- Example: Measurement units can be multiplied by any arbitrary
scale factor.
* How big: "A land area 3.6 times the size of New Jersey..."
* How far: "I'll meet you halfway..."
* How much: "If using white flour, you'll need 30% more..."
b. When values with units are divided by other values with the very
same units, the result is a unitless number.
- Percent of Total and Percent Change are prime examples
- Comparison of distances:
* "St. Johnsbury is 45 miles away, and Barton is only 15 miles.
So you have to drive 3 times as far to get to St. J."
c. Conversion factors between units work in this way. They are given
as ratios of some number of new_units divided by some other
number of original_units.
* The original_unit quantities cancel in multiplication, just as
numbers do, so you get an answer with the correct units!
* You could call conversion factors "derived quantities",
because you create them from something called an identity,
or a statement of equality that you know to be true.
d. Conversion factors will be covered next time.
3. Why bother with "counting units"? Aren't these just names?
a. Counting units are labels or names applied to individual items in
a total count, but they are still useful.
b. Using counting units helps us to make distinctions between items
that are not interchangeable, so we can keep track of the counts
for each individual kind of item.
- If you need 2 apples, having 10 onions does not help you.
- Thinking with units will help you keep inventories and to start
setting up accounting systems for your business. It will
also help you manage your kitchen and your budget at home.
Segment 2: Counting Units? Are you serious?
1. Counting units give context to the numbers that you are using in any
calculations that arise when you are buying, selling, trading or just
using up items in a beginning inventory.
Here's what happens when you don't track units in counting problems.
- Example: "John has 9 apples in his basket. If he gives 2 apples
to Mary, how many does he have left?"
- Speed test preparation textbooks seem to teach you to parse the
problem as if you were a word problem "compiler":
a. Fish out the numbers and their roles.
--> Notice that 9 is near "in his basket",
and "how many does he have left?",
It must be the source.
--> Notice that 2 is next to "gives away".
It must be the change in quantity.
b. Parse out the operation: "gives away" is code for subtraction.
c. Do the calculation and supply a numerical answer: 9 - 2 = 7
2. Re-work the problem by tracking units.
a. Read the problem. I'll wait. We will parse it together.
b. John has a basket with 9 apples in it --> beginning inventory
c. John gives away two (2) apples to Mary.
- John's inventory of 9 apples is reduced by 2 apples,
- John now has 7 apples in his basket.
d. Mary now has 2 additional apples in her inventory.
- The apples were neither created out of nothing nor destroyed.
- They came from somewhere (John), and they went somewhere (Mary).
- If "apples out" does not equal "apples in", something's wrong.
e. Having this information lets you answer questions with confidence.
f. Answer the question: "John now has 7 apples."
- John does not have '7'. John has '7 apples'.
3. Ho hum. That solution is exactly the same. You're picking nits.
a. For a trivial problem, this looks the same. But there are some
benefits of using units, even if they appear to be "just labels".
b. If the problem had said that "John gave 2 oranges to Mary", we
would have spotted the discrepancy immediately.
- Giving away oranges does not affect John's apple inventory
- The oranges must have come from another supply (account)
- We can still talk about an increase in Mary's oranges count, and
the decrease in John's oranges -- even though we don't know
the beginning or ending balances.
c. What if the problem had said,
"Mary has three times as many apples as John. How many apples
would Mary have to give to John to leave each of them with
the same number of apples?"
d. Better yet, what if the problem read:
"John has 19 apples, and Mary has 14 oranges. Now John likes
oranges twice as much as he likes apples, but Mary likes
apples three times as much as she likes oranges.
How can John and Mary exchange apples and oranges to get the
best (equal) gain in happiness?"
- This problem involves not only the tracking of apples and
oranges, but probably some type of "happiness" function
that gives a value that carries some kind of units.
Warning: There's not enough information to really solve this
problem without further assumptions. It is meant as an
illustration of how complicated a setup can become when you
get into real life situations.
- Problems like this are what make people hate economics. One
way to solve it is to define utility functions for each party.
- Their preferences are so different from their inventories, that
simply trading baskets is pretty close to an optimal solution.
e. If the problem had involved trading some of John's apples for
some of Mary's oranges, and possibly an offsetting cash payment
to correct an imbalance, we would make the best use of our
information about the sources and uses of resources by tracking
the units of each object or currency involved in the exchange.
Point: Problems can become complicated. Units can help with the
bookkeeping needed to work through to the answers.
If someone poses a problem like this one to a group at a
dinner party, it is time to remember that you forgot to
iron your curtains.
4. Final properties of counting units
a. Compatible counting units can be added and subtracted.
- Example: 6 apples + 4 apples = (6 + 4) apples, or 10 apples.
- Example: 6 apples + 2 oranges is a mixed expression. They
cannot be added, except as part of a fruit salad.
b. An amount that's given in counting units can be multiplied by an
integer, since that is like repeated additions. They can also
be multiplied by a fractional amount, but we would want to
interpret the result as a whole number.
c. Any multiplication by a floating point number would have to be
defined, and it's usually not worth the effort.
d. Counting units have weaknesses, especially in classification:
- Organic items are usually not identical. Apples can vary.
* Size: A recipe calls for "3 large apples". Are these large?
* Varieties: "Apples" in the US can include Macintosh, Rome,
Gala, Granny Smith, etc. These can be quite different.
- Animals also vary within categories:
* Cats: Lions, lynxes and Little Puff can all qualify
* House cats: Siamese, Persians, Tabby cats are all just cats,
until you have them living in your home.
- Some living things are hard to pin down: sponges, paramecia
- Other items can also create classification issues, depending on
your purpose.
* Units are just tools. Let them work for you, and not the
other way round.
Segment 3: Units of measurement
1. Measurement units are often continuous (or just about), so they can
be divided conceptually into smaller and smaller subunits as many
times as we like.
- They can also be lumped together into larger and larger wholes.
- Physical limitations place practical limits on how finely we can
actually chop things up, and still get a measurement.
- There are real world limitations on how much we can lump together.
- But you get the idea.
2. Measurement units can be applied to distance, time, area, volume,
weight or mass, energy, frequencies of light or radio waves,
voltages, current, heat, temperature, and a host of other things.
- We can measure these quantities with differing levels of precision,
based on the instruments and abilities that we have.
- For all practical purposes, we measure within tolerances that we
can meet without spending our whole lives measuring.
3. Applications of measurement units
a. Understanding the news: hectares of forest endangered by a fire,
square miles of arable farmland in South Africa,
temperatures given in unfamiliar scales such as Fahrenheit,
snowfall measurements in Canada versus neighboring Montana, etc.
b. Following recipes to make bread, cookies, beer and other items
that promote World Peace
c. Mixing chemicals for an old-school darkroom, or for a very cool
low-tech electronics home "fab lab"
d. Buying gasoline (petrol) in other countries, and understanding
their speed limits in foreign units.
- Can't help you with driving on the wrong side of the road
e. Helping your kids with their maths homework, and understanding it
for once!
f. Checking the dosages of your medications against your prescription
to find out if this is my medicine or my child's. You just
have to be able to get this one right.
We'll get to all of this and more in future episodes in this series.
]]>
Wed, 09 Oct 2013 00:00:00 +0000http://hackerpublicradio.org/eps/hpr1353.mp3