hpr2780 :: My SBC Nextcloud Install Pt. 1 - Hardware
How I built my self-enclosed Nextcloud server using a single board computer and a RAID enclosure
Hosted by minnix on Friday 2019-03-29 is flagged as Clean and is released under a CC-BY-SA license.
Tags: nextcloud,single board computer,home server,sbc,arm.
Listen in ogg,
spx, or
mp3 format. | Comments (0)
I explain the build process for my home Nextcloud server using a single board computer and a 4 bay RAID enclosure. This is part 1 of a 3 part series.
My parts list for the server build:
Rockpro64
https://www.pine64.org/?product=rockpro64-4gb-single-board-computereMMC module
https://www.pine64.org/?product=16gb-emmcUSB Adapter for eMMC module
https://www.pine64.org/?product=usb-adapter-for-emmc-modulePower supply
https://www.pine64.org/?product=rockpro64-12v-5a-us-power-supplyHeatsink
https://www.pine64.org/?product=rockpro64-20mm-mid-profile-heatsink90˚ male to female USB extension
https://www.amazon.com/wawpi-Cable-Extension-Degree-Female/dp/B01EDOGO4E4 bay RAID enclosure
https://www.mediasonic.ca/product.php?id=1358153144HDDs
The 4TB HDDs were ones I already had but you can use any ones, just make sure they are the same brand/model/size/etc to minimize any complications.
minnix at uymail dot com for help, questions, or just general chatter
Show Transcript
Automatically generated using whisper
whisper --model tiny --language en hpr2780.wav