After listening to Ken Fallon’s episode about how to check whether your remote is working or not, I checked one of our remotes that had been giving us problems and found that only a couple of the buttons produced the light. Then I found a video on YouTube showing how to fix non-working buttons and this is my report.
Subscribe to the comments RSS feed.
Comment #1 posted on 2018-07-21 19:43:02 by Hipstre
How to Fix a Remote
Thanks for this podcast. I've run into the same problem. Once I cleaned my remote about three times it was done. The "gunk" in the remote that gets on the circuit board is generally some kind of silicone lubricant or solvent. Apparently, the button pads have to be cooked after they are made to get all the silicone gunk out, and most manufacturers don't bother any longer, as they assume you will only use the remote for a year or two before losing it (or you'll just buy a new one?).
The actual, physical act of pressing the button pushes the silicone gunk out of the pad.
Thanks for the guitar pick trick!
Note to Verbose Commenters
If you can't fit everything you want to say in the comment below then you really should record a response show instead.
Note to Spammers
All comments are moderated. All links are checked by humans. We strip out all html. Feel free to record a show about yourself, or your industry, or any other topic we may find interesting. We also check shows for spam :).