Dave’s sound was a bit distorted in this recording. Having had recent problems using the Zoom recorder as a microphone, this time the in-built microphone was resorted to, with even worse results it turned out. See the Sound processing section below if you want to know more.
Some of the topics we discussed
Locations for recording. Ambient noises.
WiFi versus ethernet. Dave has a 5-port switch on his dining table (not 8-port).
The recording was made in multichannel mode in anticipation of problems. The distorted channel was processed by using the Clip Fix effect in Audacity, which didn’t seem to change much except reduce the sound level. It was also necessary to find and remove sounds produced by the push to talk key presses. Removal meant replacing these sounds by silence so the two channels would not get out of step. After this the two channels were merged together and silences truncated.
Lessons learned: don’t use a built-in microphone if you can help it!
Comment #1 posted on 2020-05-29 09:40:26 by DanNixon
Groove based tape format
Is the audio format you referred to the Tefifon (https://en.wikipedia.org/wiki/Tefifon)?
Never seen one in person but there is a good overview of it over on Techmoan's YouTube channel: https://www.youtube.com/watch?v=nBNTAmLRmUg
Comment #2 posted on 2020-05-31 10:50:15 by MrX
Re Groove based tape format
Hi Dan yes you are quite correct it was indeed the Tefifon, I couldn't remember its name. It certainly is a very strange device. The one they had at the museum of communication wasn't in working condition at the time, they were in the process of trying to repair it I hope they succeeded. I must thank you for bringing this up as I really enjoyed rewatching the YouTube video link you gave which gives an excellent introduction of the device. The sound quality seemed surprisingly good. I watched the video while sitting out in the sun in my back garden. All the best MrX
Comment #3 posted on 2020-06-03 22:03:05 by Windigo
Modern Sheevaplug support
Dave, I hope you'll be excited to hear that the Sheevaplug is still very well supported by Debian. I had one up-and-running with the latest version until very recently.
Here's a resource I used to set mine up: https://www.cyrius.com/debian/kirkwood/sheevaplug/
I have a hard time justifying keeping mine running, what with the Raspberry Pi and others being so much more full-featured and powerful, but it's definitely an interesting piece of hardware!
Comment #4 posted on 2020-06-04 09:11:51 by Dave Morriss
Re: Modern Sheevaplug support
Thanks for the link. I'd love to get my old Sheevaplug up and running again, and this looks like the site to help me do so.
I don't actually have a use for it at the moment. It had a USB disk on it and I used to use it as a Git repo (a package called 'Gitosis' I think), and could access it when away from home. Then it was a "playground" for learning about Bind. Then the disk crashed!
Anyway, this is now on my to-do list. Thank you!
Note to Verbose Commenters
If you can't fit everything you want to say in the comment below then you really should record a response show instead.
Note to Spammers
All comments are moderated. All links are checked by humans. We strip out all html. Feel free to record a show about yourself, or your industry, or any other topic we may find interesting. We also check shows for spam :).